Analog Switches & Multiplexers IC
Part No. Features VCC IQ(GVsw500mV/TA=25J) Package
PD(mW) VCC VEE
RON GRON
4051 8-CH Analog Multiplexers/Demultiplexers

* Wide Analog Voltage Range: VDDVVEE = 3V~18V.
(Note: VEE must beVSS)
* Break-Before-Make Switching Eliminates Channel Overlap.
* Linearized Transfer Characteristics
* Implement an SP8T solid state switch effectively.
* PinVtoVPin Replacement for CD4051
3.0V~18.0V 20uA(Max) DIP-16
SOP-16
TSSOP-16
500mW 15V 0V
280[(Max) 45[(Max)
4052 Differential 4-CH Analog Multiplexers/Demultiplexers

* Wide Analog Voltage Range: VDDVVEE = 3V~18V.
(Note: VEE must beVSS)
* Break-Before-Make Switching Eliminates Channel Overlap.
* Linearized Transfer Characteristics
* Implement an DP4T Switch Effectively.
* Pin to Pin Replacement for CD4052
3.0V~18.0V 20uA(Max) DIP-16
SOP-16
TSSOP-16
700mW 15V 0V
280[(Max) 45[(Max)
4053 Triple 2-CH Analog Multiplexers/Demultiplexers

* Wide Analog Voltage Range: VDD-VEE = 3V~18V.
(Note: VEE must beVSS)
* Break-Before-Make Switching Eliminates Channel Overlap.
* Linearized Transfer Characteristics
* Implement an SPDT Switch Effectively.
* Pin to Pin Replacement for CD4053
3.0V~18.0V 20uA(Max) DIP-16
SOP-16
TSSOP-16
500mW 15V 0V
280[(Max) 45[(Max)
4066 Quad Bilateral Switch

* Wide supply voltage range: 3V ~ 15V.
* High noise immunity : 0.45VDD (typ.)
* Wide range of digital and 7.5VPEAK analog switching
* ON resistance for 15V operation : 80[
* Matched ON resistance : GRON=5[ (typ.)
over 15V signal input
* ON resistance flat over peak-to-peak signal range
* High ON / OFF : 65 dB (typ.)
output voltage ratio @ fIS=10kHz, RL=10k[
* High degree linearity: 0.1% distortion (typ.).
@ fIS=1kHz, VIS=5Vp-p.
* VDD-VSS=10V, RL=10k[
* Extremely low OFF : 0.1nA (typ.)
* switch leakage @VDD-VSS=10V, TA=25XC
* Extremely high control input impedance : 1012[ (typ.)
* Low crosstalk : -50dB (typ.)
* between switches @ fIS=0.9MHz, RL=1k[
* Frequency response, switch ON : 40MHz (typ.)
3.0V ~ 15.0V 4uA(Max) DIP-14
SOP-14
TSSOP-14
700mW/500mW 15V -
240[(Max) 5[(typ)
U7SB3157 10[ SPDT Analog Switch

*Useful in Both Analog and Digital Applications
*Specified Break-Before-Make Switching
*Low ON-State Resistance:10[
*Wide Single-Supply Operation:1.65V to 5.5V
1.65V~5.5V 1uA(Max) MSOP-10
 - 4.5V 0V
10[(Max) 0.15 [(TYP)
US5V330 Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux

* Single supply operation: +5.0V
* Low Power Consumption (0.1gA typical)
* Wide bandwidth: 360 MHz (typical)
* Low On-Resistance: 5[ (typical)
* Low crosstalk at 10 MHz: -48 db
* Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
4.5 V ~ 5.5 V 3uA(Max) SSOP-16
500mW 5V 0V
10[(Max)  -
US5C3125 4-Bit Bus Switch With Individual Enables

* Low on-resistor between two ports (5[ typical)
* Near-Zero propagation delay
* Direct bus connection when switches are ON
* Ultra Low Quiescent Power (0.1gA typical)
   -Ideally suited for notebook applications
4.5~5.5V 3uA(Max) TSSOP-14
500mW 4.5V 0V
7[(Max) -
US5C3257 Quad 2:1 MUX/DEMUX Bus Switch

* 5[ switches connect inputs to outputs
* ESD protection on pin
* Near zero propagation delay
* Ultra Low Quiescent Power (0.2gA Typical)
VIdeally suited for notebook applications
* Direct bus connection when switches are ON
* Pin compatible with U74 series logic devices
4.5~5.5V 3uA(Max) SOP-16
TSSOP-16
500mW 4.5V 0V
7[(Max) -
US5C3305 2-Bit Bus Switch with Individual Enables

* Low on-resistor between two ports (5[ typical)
* Near-Zero propagation delay
* Direct bus connection when switches are ON
* Ultra Low Quiescent Power (0.2gA typical)
- Ideally suited for notebook applications
4.0V~5.5V 3uA(Max) MSOP-8
TSSOP-8
350mW 4.5V 0V
7[(Max) -
US5C3306 2-Bit Bus Switch with Active Low Enables

* Low on-resistor between two ports (5[ typical)
* Near-Zero propagation delay
* Direct bus connection when switches are ON
* Ultra Low Quiescent Power (0.2gA typical)
- Ideally suited for notebook applications
4.5V~5.5V 3uA(Max) MSOP-8
350mW 4.5V 0V
7[(Max) -
US5C3309 3:1 MUX / DEMUX Bus Switch

* Low on-resistor connection between input and output (5[ typical)
* Near-Zero propagation delay
* Direct bus connection when switches are ON
* Ultra Low Quiescent Power (0.2gA typical)
- Ideally suited for notebook applications
4.5V~5.5V 3uA(Max) SOP-8
MSOP-8
500mW/350mW 4.5V 0V
7[(Max) -
UMX2215 LOW ON-RESISTANCE WIDE BANDWIDTH DUAL 4:1 MUX/DEMUX ANALOG SWITCH

*CMOS Technology for Bus and Analog Applications
*2V to 5.5V Supply Operation
* Rail-to-Rail Analog Signal Range at VDD=2V to 5.5V
*Low On-Resistance: 4.5[ at 5V
*High Off-Isolation: -66dB at 10MHz
*Low Crosstalk: -60dB at 10Mhz
*System Level ESD Protection Exceeds 8kV (direct contact) for Analog
Signal I/O Pin
2V~5.5V 1uA(Max) SOP-16
500mW 5V 0V
4.5[(Typ) 0.3[(Typ)
UMX8228 High-Speed USB 2.0 (480-Mbps) 1:2
Multiplexers/Demultiplexers Switch

* Supply Range: 1.8V ~ 5.5V
* -3dB Bandwidth: 550MHz
* RON is Typically 6[
* Low Power Consumption (1gA Maximum)
* Break-Before-Make Switching
* Rail-to-Rail Input and Output Operation
* Extended Industrial Temperature Range: -40XC ~ +85XC
1.8~5.5 1uA(Max) MSOP-10
 -  3 0
7[(TYP) 0.25[(TYP)
UMX4215 Low On-Resistance Wide bandwidth Single 2:1  Mux/DEMUX Analog Switch

* Useful in Both Analog and Digital Applications
* VDD Supply Range : 1.65V to 5.5V
* Rail-to-Rail Signal Handling
* Low On-Resistance : 5[ at VDD=4.5V
* High Off-Isolation : -66dB at 10MHz
* Low Crosstalk: -60dB at 10Mhz
1.65V~5.5V 1uA(Max) SOT-363
250mW 4.5V 0V
4.2[(Typ) 0.1[(Typ)
UMX2110* Low On-Resistance Wide bandwidth Dual 1:1 Analog Switch Of Level Shifter

* VDD Supply : 4.4V ~ 5.5V
* Low On-Resistance : 5[ @ VDD = 4.4V
4.5V ~ 5.5V 1uA(Max) SOT-26
500mW 4.4V 0V
4[(Typ) 0.4[(Typ)
UMX2211* USB 2.0 High-Speed (480Mbps) Dual 2:1 MUX/DEMUX Analog Switch

* USB 2.0 compliant (high speed and full speed)
* VDD Supply : 2.8V ~ 5V
* Channel On Capacitance : 6.5pF
* Low On-Resistance : 4.5[ at VDD=3V
2.8V ~ 5.0V 1uA(Max) SOP-14
QFN10-(1.8x1.4)
500mW 3V 0V
4.5[(Typ) 0.5[(Typ)
UCA9543* 2-Channel I2C Bus Switch With Interrupt Logic And Reset

* 1-of-2 Bidirectional Translating Switches
* I2C Bus and SMBus Compatible
* Two Active-Low Interrupt Inputs
* Active-Low Interrupt Output
* Active-Low Reset Input
* Two Address Pins Allowing up to Four UTC UCA9543
Devices on the I2C Bus
* Channel Selection Via I2C Bus, in Any Combination
* Power-up With All Switch Channels Deselected
* Low RON Switches
* Allows Voltage-Level Translation Between 1.8V, 2.5V, 3.3V and
5V Buses
* No Glitch on Power-up
* Supports Hot Insertion
* Low Standby Current
* Operating Power-Supply Voltage Range of 2.3V to 5.5V
* 5.5-V Tolerant Inputs
* 0 to 400-kHz Clock Frequency
2.3~5.5V 1uA SOP-14
400mW 5.5V 0V
20 -
UMDM27518* 6-Bit, 1-of-2 Multiplexers/Demultiplexers With Integrated IEC L-4 ESD And 1.8V Logic Compatible Control Inputs

* 1.65V~3.6V Single-Supply Operation
* Bandwidth up to 240MHz for High-Speed Rail-to-Rail Signal Handling
* Low Capacitance Switches, 21.5pF (Typical)
* Isolation in Powerdown Mode, V+=0
* 1.8V Logic Threshold Compatibility for Control Inputs
* 3.6V Tolerant Control Inputs
* Crosstalk and Off Isolation of -62dB
1.65V ~ 3.6V 0.3uA(Max) TSSOP-24
- 3.3V 0V
6.2[(Max) 0.7[(Max)
UDS22364* 0.65[ Dual SPDT Analog Switches With Negative Signaling Capability

* Specified Break-Before-Make Switching
* Negative Signaling Capability: Maximum Swing From -2.75V to 2.75V (V+ = 2.75V)
* Internal Shunt Switch Prevents Audible Click-and-Pop When Switching Between Two Sources
* Low ON-State Resistance (0.65[ Typical)
* Low Charge Injection
* Excellent ON-State Resistance Matching
* 2.3V to 5.5V Power Supply (V+)
2.3V ~ 5.5V 1.3uA (Max) SSOP-10
- 4.5V 0V
0.74[(Max) 0.23[(Max)
U74CB3Q3245* 8-BIT FET BUF SWITCH
2.5V-/3.3V LOW-VOLTAGE
HIGH BANDWIDTH BUS
SWITCH
n

* High-Bandwidth Data Path(up to 500MHz)
* 5V Tolerant I/Os With Device Powered Up or Powered
Down
* Low and Flat ON-State Resistance (RON) Characteristics
Over Operating Range (RON=4[ Typ.)
* Rail-to-Rail Switching on Data I/O Ports
V0 to 5V Switching With 3.3V VCC
V0 to 3.3V Switching With 2.5V VCC
* Bidirectional Data Flow With Near-Zero Propagation
Delay
* Low Input / Output Capacitance Minimizes Loading and
Signal Distortion(Cio(OFF)=3.5pF Typ.)
* Fast Switching Frequency (fOE=20MHz Max.)
* Data and Control Inputs Provide Undershoot Clamp
Diodes
* Low Power Consumption (ICC=1mA Typical)
* VCC Operating Range From 2.3V to 3.6V
* Data I/Os Support 0 to 5V Signaling Levels
(0.8V,1.2V,1.5V,1.8V,2.5V,3.3V,5V)
* Control Inputs Can Be Driven by TTL or 5V/3.3V CMOS
Outputs
* IOFF Supports Partial-Power-Down Mode Operation
* Supports Both Digital and Analog Applications:
PCI Interface, Differential Signal Interface, Memory
Interleaving, Bus Isolation, Low-Distortion Signal Gating
2.3V~3.6V 2mA(Max)  TSSOP-20
- 3.6V 0V
280[(Max) -
隔壁呻吟太大少妇受不了_宝宝把腿开大点就不疼了图_宝贝放松这才一根手指_第一次玩交换真实经历
<֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <ı> <ı> <ı> <ı> <ı> <ı>